The GTO Exit Wand automatically activates gate operators when vehicle approaches. The electromagnetic sensor detects metal mass-in-motion, allows for hands-free exit from property and is designed for residential, agricultural and commercial applications. Wand provides for up to 12' radius of detection and is ideal for solar application due to very low power consumption.

FM139 (50 ft) - $185.50  (plus $9.00 S&H)

FM141 (150 ft) - $265.00  (plus $10.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

The GTO Automatic Gate Lock/Pull to Open is designed to use with GTO/PRO Swing Gate Operators or with the Mighty E-Z Gate Opener for added security. The Automatic Gate Lock also provides stability for the gate in the closed position - especially in areas where high winds are common. The gate lock is solenoid driven, and it has a plated steel bolt and a zinc plated steel housing. It comes with keys and key switch to allow manual release when necessary. The GTO Automatic Gate Lock/Push to Open or Open Position (available through PRO dealers only) is similar to the Pull-to-Open model but is designed to be used with GTO/PRO Swing Gate Operators in push-to-open installations. The Automatic Gate Lock also provides stability for the gate in the open position.

FM144 (closed pos.) - $165.63  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

The Bulldog Pedestrian Gate Lock (available through PRO dealers only) is designed for horizontal use on "walk-thru" gates without automatic gate operators. This lock is an affordable way to protect swimming pool areas, playgrounds, tennis courts, and other secured areas from unwanted access. The Bulldog is battery operated; the battery charge is maintained by the 12 volt DC charger (included) or the Bulldog Solar Panel accessory. The Bulldog comes with a push button entry control and has a keyswitch to allow manual operation when desired. The Bulldog can be accessorized for additional security with either the Bulldog Digital Keypad or the GTO Digital Keypad

FM145 - $223.26  (plus $10.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

All GTO Automatic Gate Openers can be opened (and closed) with GTO Entry Transmitters. The Single Button Transmitter comes standard with GTO/PRO and Mighty Mule E-Z Gate Opener systems. The Key chain Mini Transmitter is a miniature version of the Single Button Transmitter, and like its name suggests, hangs conveniently from your key chain. The Dual and Triple Button Transmitters will operate two or three gate openers and/or garage door openers (see Garage Door Receiver). All GTO Entry Transmitters have adjustable code settings and each transmitter comes with battery included.

(Single Button) RB741 - $27.50  (plus $9.00 S&H)

Battery for Single Button - $3.74  (plus $8.00 S&H)

(Dual Button) RB742 - $30.00  (plus $9.00 S&H)

(Triple Button) RB743 - $32.50  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

The Garage Door Receiver allows the use of one Entry Transmitter (see Dual or Triple Button Transmitters) to control both gate openers and garage door openers. The Garage Door Receiver is compatible with most garage door openers.

RB709 - $53.00  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

How do you allow guests to open your gate while still maintaining access control? With the weatherproof GTO Digital Keypad. The GTO Digital Keypad is face programmable for up to fifteen different entry codes. Individual codes can be changed without affecting the other entry codes. For instance, you can give a delivery person a specific code to open your gate, and after the delivery you can change that code. The delivery person will no longer be able to use that code to gain access, however the other entry codes will still work for your other guests.

The digital keypad can be used as a wired or wireless installation for all GTO Automatic Gate Openers and can be used as a wired installation for the Bulldog Pedestrian Gate Lock. In a wired installation, the Digital Keypad can operate a garage door. In a wireless installation, the Digital Keypad can be used with any garage door opener that receives a 318 Mhz FM, signal, and it can also be used in conjunction with the GTO garage door receiver kit on any other garage door. The keypad requires 3 AA batteries. If the keypad is to be wired to the lock or gate opener, you will need to purchase 16 gauge, multi-stranded, low voltage wire.

F310 - $62.50  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

F100: In-ground Pedestal

F110: Surface Mount Pedestal

F100 - $139.13  (plus $11.00 S&H)

F110 - $139.13  (plus $11.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

The Push Button Entry Control is an unlit doorbell button for remote entry or exit control. If you do not need to limit access to your property, the push button control can be installed outside of the gate to allow entry for guests without transmitters. It can be installed on the inside of your gate to allow guests without transmitters to exit. If your home is within 1000' of your gate, you can install the push button in your house. The Push Button entry control wires directly into the control board using GTO low voltage wire. (not included).

RB101 -  $3.13  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

GTO/PRO F3100MBC/FM136

Wireless Intercom and Digital Keypad. This versatile intercom with keypad system is ideal for any residential application, alerting you of visitors and allowing gate opener activation from the safety of your home. The intercom provides superior range with crystal clear two-way communication up to 500 feet wireless or 1,000 feet wired. Compatible with all GTO/PRO, Mighty Mule and most other gate opener systems.

F3100MBC -  $284.88  (plus $10.00 S&H)

or call toll-free to order at (877) 275-1270

JGR1099 Multicode Receiver - 300 Mhz frequency compatible with gate openers

JGR1099 - $73.20  (plus $8.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

JGR3060 Multicode Mini Transmitter - Key Chain Mini 300 Mhz frequency,

JGR3060 - $26.50  (plus $8.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

JGR3089 Multicode Transmitter -  Single Button Transmitter 300 Mhz frequency, visor clip type

JGR3089 - $23.13  (plus $8.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

TM-GTO-12V DC 12 volt 7 Day timer - Used to program time periods that your gate operator will open or close.  Accepts up to 10 program settings, low voltage DC timer made to hook up to GTO operator battery without draining the battery.
 

TM-GTO-12V - $90.10  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

EAG2000FB Pad Lock Fire Box - Uses a micro switch to open the gate, made of 14 gauge steel and powder coated bright red. The front door has a hole for a standard padlock, which can be removed by the Fire Department. A blank label on the inside of the door is provided for written instructions and there is room for stored gate release keys.  The Dimensions are 6" (H) x 5 1/2" (W) x 3" (D).

EAG2000FB - $73.75  (plus $8.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

EAG2070 Chain Release Fire Box - Easily used in a power failure as an emergency release by pulling on the handle. Bright red powder coat finish with a Fire Dept. label on both sides.  6" (H) x 4 1/2" (W) x 4" (D).

EAG2070 - $108.75  (plus $8.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

GTOAQ250 PRO1000 Control Board

$211.34  (plus $9.00 S&H)

........................................

GTO R4222 GTO Photobeams: The GTO Photo Beam is a photoelectric dual beam detector that provides a 'non-contact' means of entrapment protection. This photo beam emits a pulsed infrared beam that, when broken by a person or vehicle, will stop or reverse your gate operator to prevent entrapment.

This photo beam can be installed on a wall or a post. You can use multiple sets to protect all areas of entrapment. Operates at a distance of up to 295'. Measures 6.75" x 3.25" x 3".

• Photoelectric Dual Beam Detector

• Maximum range of 98 to 295 ft (outdoor/indoor)

• Can be mounted to a wall or a post

• Measures 6.75" x 3.25" x 3"

• Requires low voltage wire (RB509)

• Includes: Transmitter, Receiver and Mounting Hardware

GTO R4222- $89.38  (plus $9.00 S&H)

or call toll-free to order at (877) 275-1270

........................................

1 - Transmitter

2 - Universal Receiver

3 - Interior Intercom Base Station

4 - Wireless Intercom/Keypad

5 - Digital Keypad

6 - Keypad/Intercom Pedestal

7 - Driveway Vehicle Sensor

8 - Loop Detector

9 - Push Button Control

10 - Photo Beams

11 - Auto Gate Lock

12 - Bulldog Pedestrian Gate Lock

13 - Solar Panels

14 - Driveway Alarm

15 - Wireless Vehicle Sensor