|
Doorking DKS-9150 Gate Opener -
Commercial & Industrial Operator
Looking for an automatic swing gate
opener that combines security and ease of use? Shop from
the openers listed below, or view our entire line of
Doorking gate operators.
Shipping & Handling is added to your total before checkout,
shipping through UPS/DHL (physical addresses only, no PO Boxes).
Email us
or call toll-free 877-275-1270 for assistance from a gate
expert.
Model 9150 operators are designed to operate vehicular slide
gates in residential, commercial and industrial applications.
These operators are designed so that they can easily be
mounted in the front, center or rear of the gate without any
costly and time consuming field modifications. In addition,
the operators can be pad or post mounted to meet any
installation requirements. The 9150 can be equipped with a
factory installed DC Convenience Open option which will
automatically open the gate in the event of a power outage.
Advanced Features
Self-adjusting, no maintenance
magnetic limits.
Partial-open feature.
Anti-tailgating feature.
Gate tracker reporting output.
Ports for plug-in loop detectors.
DC Powered Convenience Open
(Optional).
Two convenience outlets.
Fail-safe release (fail-secure
optional).
Programming switches.
Built-in reset switch.
Built-in power On/Off switch.
Specifications
Model 9150 with 1 HP Motor
Maximum gate length 45-feet.
Maximum gate weight 1500 pounds*.
1 HP continuous-duty motor.
115, 230*, 460* VAC (*230 and 460
volt units use a step-down power transformer to achieve 115
volt operating voltage.)
Operator is shipped with chain
brackets and 20-feet of #40 chain.
Class I, II, III and IV
applications.
Compliant with UL 325 and 991. ETL
listed.
Dimensions: 15"W x 24"H x 16.5"D
DoorKing DKS9150-080 1 HP
SLIDE OPER FOR 45 x 1500
$1775.00
(plus $75.00 S&H)
DoorKing DKS9150-082 1 HP
SLIDE OPER W/
CONV OPEN
$2095.00
(plus $75.00 S&H)
Model 9150 with 1/2 HP Motor
Maximum gate length 30-feet.
Maximum gate weight 1000 pounds*.
(*Assumes gate is on level ground, in good condition with
properly adjusted hardware. Other external factors may affect
the performance of the gate operator. If DC Convenience Open
option is installed, maximum gate weight is 1300 pounds. Other
external factors may affect the performance of the gate
operator.)
1/2 HP continuous-duty motor.
115, 230*, 460* VAC (*230 and 460
volt units use a step-down power transformer to achieve 115
volt operating voltage.)
Operator is shipped with chain
brackets and 20-feet of #40 chain.
Class I, II, III and IV
applications.
Compliant with UL 325 and 991. ETL
listed.
Dimensions: 15"W x 24"H x 16.5"D
DoorKing DKS9150-084 1/2 HP
SLIDE OPERATOR 30' & 1000
$1340.00
(plus $75.00 S&H)
DoorKing DKS9150-086 1/2 HP
SLIDE W/CONV OPEN
$1785.00
(plus $75.00 S&H)
Questions about these automatic gate openers?
Call toll free 877-275-1270 for helpful answers.
>> take me back to
top of page
|
