|
Automatic Gate Opener Hardware &
Replacement Parts
From wiring to mounting kits, we carry a wide variety of
parts and hardware.
Shop online securely through our encrypted checkout system.
Shipping & Handling
is added to your total before checkout, shipping through UPS/DHL
(physical addresses only, no PO Boxes).
Have a question about any of the
parts listed below, or one that you're looking for?
Please
email us
or give us a call toll-free at 877-275-1270 for helpful answers
and product suggestions.
Click Here
for GTO related entry-access and other accessories.
|
 |
GTO Low
Voltage Wire is required for wiring the GTO Automatic Gate
Opener to the AC Transformer. It is also necessary for
connecting some accessories such as the Push Button Entry
Control and the Digital Keypad (wired option). This wire
is 16 gauge, dual conductor, multi-stranded, and is ready
for direct burial.
This is the only wire recommended for use with GTO
products. This 16 gauge, PVC sheathed wire will enable the
transformer to provide an adequate charge to the control
board from as far away as 1000 ft.
Do not use telephone wire or any solid core wire; this
wire does not work as well as the multi-stranded and can
cause the opener to go into low voltage lockout. Never
splice wires together. Splicing will seriously reduce the
wire's ability to carry an adequate current and it
provides a weak point for corrosion
RB509 - $0.51 / ft
call us toll-free to order a
specific length of low voltage wire: (877) 275-1270
........................................
|
|
|
The Master Pin
Lock substitutes for the clevis pin at either or both
mounting points of the Mighty Mule E-Z Gate Opener or the
GTO/PRO 1000 series swing gate opener arm. It can also be
inserted above the quick release pins in both chain
brackets of the GTO/PRO SL-1000 slide gate opener. The pin
lock deters theft of the opener arm but still allows the
key holder to manually open the gate when necessary. There
is also a Master Pin Lock available for the GTO/PRO 2000
series.
FM345KA1 - $13.25 (plus $9.00 S&H)
or call toll-free to order at (877)
275-1270
........................................
|
|
 |
Receivers with
10 ft. cables come with all GTO Swing Gate Openers (not
necessary for the PRO 1200 and the PRO 2200) ; a receiver
with a 20 ft. cable comes with the GTO/PRO SL-1000 and GTO/PRO
SL-2000. Replacement receivers can be purchased with
cables in lengths of 10 ft., 25 ft., 50 ft. and 100 ft.
(available through PRO dealers only)
AQ201 - $60.00 (plus $8.00 S&H)
|
|
 |
347IH Push To Open Bracket
3000 & 500
347IH - $18.42 (plus $9.00 S&H)
R4KPTO Push To Open Bracket
4000
R4KPTO - $66.65 (plus $10.00 S&H)
or call toll-free to order at
(877) 275-1270
........................................
|
 |
RB207 Chain # 41 DC Slider 32'
For SL-1000 / SL-2000 series
RB207 - $73.72 (plus $12.00 S&H)
RB208 Master Link for RB207
RB208 - $1.32 (plus $9.00 S&H)
or call toll-free to order at
(877) 275-1270
........................................
|
Miscellaneous Hardware - Gate Mount Kits
FTMT5030 Front Mount for 500/3000
FTMT5030 - $19.21
(plus $9.00 S&H)
...............................................
FTMT40 Front Mount for 4000
FTMT40 - $19.21
(plus $9.00 S&H)
>> take me back to
top of page
|
