|
PRO-SW1500 for Single Gates
Low Voltage Swing Gate Operator designed specifically for rural
farm and ranch style applications. The PRO-SW1500 is designed
for lighter weight gates. Unlike most GTO operators, the
PRO-SW1500 uses a 12V automobile or marine battery (not
supplied). It also has no control box, the control board is
mounted in the operator housing. This versatile GTO/PRO gate
operator is ideal for light tubular steel, vinyl, wood, or chain
link gates. Can be powered by either a low voltage transformer
or solar charger.
-
12 volt system, no electrician
needed for installation
-
Gate will work during electrical
power outage
-
Quick and easy installation, with
user friendly instructions
-
Solar Panel Charger available for
remote locations
-
Will operate a gate up to 12' long
and weighing up to 350 lbs. each leaf
-
Can operate 175 or more gate cycles
per day using transformer charger, depending on gate size and
weight
-
Control board built into the
operator housing (replaceable)
-
Receiver unit with antenna and 10'
cable can be placed in best location for reception of signal
-
Can be operated by remote
transmitter, digital keypad, push button or combination
-
Full systems capable "add on ready"
heavy-duty control board includes adjustable obstruction
sensing, gate sequencing and auto close settings (0-120
seconds).
-
Full access ready package includes,
radio receiver, entry transmitter, AC transformer, and all
necessary mounting hardware for a standard installation.
Standard automotive or marine battery housed in a standard
battery box is required (not included)
-
Can operate as 'push to open' or
'pull to open' (specify when ordering - extra hardware required
for push to open)
-
UL rated for Class I, II, III.
System certified to be in compliance with UL 325, 5th edition.
-
12 month limited warranty applies to
replacing parts from GTO, Inc.
Technical Specifications:
Drive
-
Powered by reliable 12 volt DC
motor, totally enclosed gear drive system.
-
Temperature rating of motor: -5º F
(-28º C) to +160ºF (+71ºC)
-
Opening time is 18-24 seconds.
-
Range of arm stroke is up to 19" (48
cm), with arm fully retracted is 37.25" (95 cm), mounting point
to mounting point.f
Power
-
The PRO-SW1500 system is powered by
a 12V automobile or marine battery (not supplied). A
weatherproof battery box is required, can be found in most
hardware, automotive, marine, or home centers.
-
Battery charge maintained by a 120V
AC/60 Htz input and 18VAC at 40VA. output, transformer rectified
to 14VDC through the control board. NOTE: Transformer should
never be connected directly to any battery.
-
Optional GTO Solar Panel Charger:
float voltage 14.5 V DC output from a 19-3/8" (49.21 cm) x
15-1/4" (38.74 cm) silicon alloy panel. Generates minimum of 10
watts at 600 mA. A gated diode on the control board prevents
battery discharge.
Controls
-
The GTO control board can be
programmed for pull-to-open or push-to-open.
-
Adjustable auto close, obstruction
sensitivity and dual gate sequencing.
-
Auto-memorization of digital
transmitter code.
-
Charging regulated circuit on
control board. "Sleep draw" is 40 mA; "active draw" is 2 to 5
amps.
-
GTO remote-mounted RF receiver tuned
at 318 MHz.
Includes:
-
Operator arm
-
AC transformer
-
Control board (enclosed in
weatherproof operator housing)
-
Receiver with 10 ft. cable
-
Entry transmitter
-
10' battery wire harness
-
Mounting hardware
-
Installation/safety manual
-
Caution signs.
-
Warning Beeper
-
Adjustable obstacle-reversing safety
feature
PRO1500 - $399.00 (plus $12.00 S&H)
|
