|
Viking Gate Openers and Accessories
Don't put off enjoying the convenience of a
Viking automatic gate opener. The following prices do not
include shipping and handling, please
email us
or call toll free 877-275-1270 for freight prices.
Sliding Gate Openers
L-3 Slide Gate Operator
CLASS I, CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
The L-3 gate operator has the
capacity to operate slide gates up to 1200 lbs. and 40 feet in
length at 100% duty cycle under extreme conditions. Its
efficient mechanism provides a solution for high traffic
commercial slide gate applications. The Viking L-3 gate
operator offers efficiency and technology combined in a single
package.
|
Some of the standard features include: 7 year residential and 5
year commercial warranty, UL 325 and 991 listing, innovative
fine tune adjustment for the end of gate travel ( down to 1/8"
), back drivable unit featuring direct drive mechanism, soft
start and soft stop with adaptive learn algorithm, easy accessed
switch for manual operation, 120/220 VAC single phase power
source, a built in three push button station, a built in battery
backup capable of 100 cycles in case of power failure, on-board
lightning protection, and easy access to limit switches.
Viking L-3 Slide Gate Operator $1470.00
call toll-free to order at (877)
275-1270
.......................................................
H-10 Slide Gate Operator
CLASS I, CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
The H-10 gate operator has the
capacity to operate slide gates up to 2000 lbs. and 45 feet in
length at 100% duty cycle under extreme conditions. Its
efficient mechanism provides a solution for high traffic
commercial slide gate applications. The Viking H-10 gate
operator offers efficiency and technology combined in a single
package.
|
Some of the standard features
include: 7 year residential and 5 year commercial warranty, UL
325 and 991 listing, innovative fine tune adjustment for the end
of gate travel ( down to 1/8" ), back drivable unit featuring
direct drive mechanism, soft start and soft stop with adaptive
learn algorithm, easy accessed switch for manual operation,
120/220 VAC single phase power source, a built in three push
button station, a built in battery backup capable of 100 cycles
in case of power failure, on-board lightning protection, and
easy access to limit switches.
Viking H-10 Slide Gate Operator $1798.00
call toll-free to order at (877)
275-1270
.......................................................
Q-4 Slide Gate Operator
CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
The Q-4 incorporates a powerful and
efficient DC motor, a high ampacity power supply, an integrated
battery back-up system and intelligent controller.
The incorporation of these features
results in outstanding performance on heavy duty slide gates.
The advanced motor control circuit driving the motor guarantees
long life.
|
The Q-4 brings the advantages of DC
gate operators into heavy duty applications. Some of the
standard features include: 5 year commercial warranty, UL 325
and 991 listing, innovative fine tune adjustment for the end of
gate travel ( down to 1/8" ), adaptive algorithm with smooth
acceleration and deceleration, more than 1/2 kilowatt of power,
built in battery backup capable of 100 cycles in case of power
failure, a powerful and efficient gear head motor, fail-safe -
fail-secure electromechanical lock, and adjustable height for
the main drive.
Viking Q-4 Slide Gate Operator $4042.00
call toll-free to order at (877)
275-1270
.......................................................
K-2 Slide Gate Operator
CLASS I, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
The K-2 slide gate operator raises
the bar in quality for the residential market. This machine
operates a highly efficient direct motor drive which allows
operation at 100% duty cycle. This assures efficiency and
reliability. The fail-safe, fail-secure options of the gate
operator allows it to handle gates up to 650 lbs. In conformance
with UL 325 and UL 991 Type I, III and IV.
|
Some of the standard features
include: 5 year warranty, UL 325 and 991 listing, an innovative
fine tune adjustment for the end of gate travel ( down to 1/8"
), back drivable unit to help compliance with fire department
authorities, soft start and soft stop with adaptive learn
algorithm, easy accessed switch for manual operation, 120/220
VAC single phase power source, a built in three push button
station, a built in battery backup capable of 100 cycles in case
of power failure, on-board lightning protection, and easy access
to limit switches.
Viking K-2 Slide Gate Operator $1071.98
call toll-free to order at (877)
275-1270
.......................................................
Swinging Gate Openers
F-1 Swing Gate Operator
CLASS I, CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
The standard specifications and
features of the F-1 swing gate operator showcase the
commitment made in its concept and design.
Whether its the simple, clean
installation, energy efficient operation, or advanced
battery backup function, this operator stands alone in its
class. |
Some of the standard features
include: 7 year residential and 5 year commercial
warranty, UL 325 and 991 listing, fail-safe / fail-secure
clutch mechanism, simple limit switch arrangement, clam
shell cover design, 120/220 VAC single phase power source,
built in three push button station, built in battery
backup capable of 300 cycles in case of power failure,
on-board lightning protection, and soft-start - soft-stop
with intelligent obstruction detection.
Viking F-1 Swing Gate Operator
$1642.20
call toll-free to order at (877)
275-1270
.......................................................
R-6 Swing Gate Operator
CLASS I VEHICULAR GATE OPERATOR
|
 |
Viking Access introduces gate
operation with no belts, chains or extra coupling
mechanisms. The R-6 swing gate operator is capable of
handling gates up to 600 lbs. and 14' long.
The direct drive mechanism in
combination with the adaptable algorithms in the control
board set a new standard in gate automation. |
Some of the standard features
include: 5 year warranty, UL 325 and 991 listing,
fail-safe / fail-secure clutch mechanism, efficient
direct-drive gear head motor, simple limit switch
arrangement, clam shell cover design, 120/220 VAC single
phase power source, built in three push button station,
built in battery backup capable of 800 cycles in case of
power failure, on-board lightning protection, and
soft-start - soft-stop with intelligent obstruction
detection.
Viking R-6 Swing Gate Operator
$1199.00
call toll-free to order at (877)
275-1270
.......................................................
G-5 Swing Gate Operator
CLASS I, CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
With its compact, low profile
design and the power to support 700 lbs of weight along with
gate lengths of up to 16 feet, the Viking G-5 will
revolutionize the idea of gate operation. This operator is
manufactured with the highest quality components and is
designed to accent any gate style. Capable of continuous
cycles operation at 24V DC, converted directly from an AC
line. |
The battery back-up provides
up to 400 cycles of operation with a maximum capacity
gate. Some of the standard features include: 3 year
residential and 2 year commercial warranty, UL 325 and 991
listing, adjustable timer for automatic close, a high
efficiency power supply, a built in three push button
station, a built in battery backup capable of 400 cycles
in case of power failure, on-board lightning protection,
and an easily accessed key release for manual operation.
Viking G-5-1 Single Swing Gate
Operator $1099.00
Viking G-5-2 Dual Swing Gate Operator $1895.00
call toll-free to order at (877)
275-1270
.......................................................
X-9 Swing Gate Operator
CLASS I, CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
Standard specifications and
features of the X-9 gate operator showcase the commitment
made in its concept and design. Whether it's the simple,
clean installation, energy efficient operation, or advanced
battery backup function, this operator stands alone.
Included with the standard package are high quality direct
burial cable, complete control center and X-9 operator. |
Some of the standard features
include: 3 year residential and 2 year commercial
warranty, UL 325 and 991 listing, adjustable timer for
automatic closure, high efficiency power supply, a built
in three push button station, a built in battery backup
capable of 800 cycles in case of power failure, on-board
lightning protection, and easy access to limit switches.
Viking X-9-1 Single Swing Gate
Operator $1125.00
Viking X-9-2 Dual Swing Gate Operator $1925.00
call toll-free to order at (877)
275-1270
.......................................................
I-8 Underground Gate Operator
CLASS I, CLASS II, CLASS III, CLASS IV VEHICULAR GATE OPERATOR
|
 |
The answer for an elegant
solution for access control is fulfilled with the i-8 gate
operator. The discreteness of the installation, the
flexibility of operation, the efficiency of automation, and
the adaptability of integration makes the i-8 gate operator
a perfect solution in situations where aesthetics are
required to satisfy the most exquisite taste. |
Some of the standard features
include: 3 year residential and 2 year commercial
warranty, UL 325 and 991 listing, a water resistant gear
head unit, single stage, efficient gearing system, key for
manual release, powerful and efficient DC motor in
direct-drive configuration, aluminum, stainless steel and
plated steel Internal parts, and built in battery backup
capable of 400 cycles in case of power failure.
Viking I-8-1 Swing Gate Operator
$1599.00
Viking I-8-2 Dual Swing Gate Operator $2895.00
Questions about these automatic gate openers?
Call toll free 877-275-1270 for helpful answers.
>> take me back to
top of page
|
